thrust ball bearings

Thrust ball bearings are classified into those with flat seats or aligning seats depending on the shape of the outer ring seat (housing washer). They can sustain axial loads but no radial loads. For Single-Direction Thrust Ball Bearings, pressed steel cages and machined brass cages are usually used The cages in Double- Direction Thrust Ball Bearings are the same as those in Single-Direction Thrust Ball Bearings of the same diameter series.
Features:Available in two designs: single direction and double direction.To accommodate initial misalignments in an assembly both designs are available with spherical aligning seats or aligning seat washers.High quality steel-ultra clean steel to extend bearing life by up to 80%.Advanced Grease Technology — NSK lubricants that can extend grease life and performance.
High Grade Balls — Quiet and smooth operation even at high speed.Optional seating rings take initial misalignment.

Bearing Number	Bore Dia	Outer DIa	Width	Size
KOYO 51248 thrust ball bearings	Mounted Cartridge Units	0.0	N/A	11.804
170 mm x 310 mm x 86 mm SKF NJ 2234 ECML thrust ball bearings	Flange Block	0.0	N/A	3.632
30 mm x 68 mm x 10 mm ISB 52307 thrust ball bearings	3-7/16 in	Babbitt	13 in	Uncoated
ISO 51106 thrust ball bearings	Bearing Rebuild Kit	QV	2.9375 in	883450315791
SKF BEAS 017047-2RZ thrust ball bearings	Take Up Units	0.0	N/A	10.442
NTN-SNR 51416 thrust ball bearings	Flange Block	0.0	N/A	19.522
Toyana 54322U+U322 thrust ball bearings	2.0000 in	280740 lbf	7.5 º	5.0100 in
17 mm x 47 mm x 15 mm KOYO SAC1747B thrust ball bearings	4-15/16 in	Triple Lip	12-3/4 in	6.08 in
PSL PSL212-320 thrust ball bearings	Mounted Units & Inserts	0.0	N/A	7.037
SKF 53203 + U 203 thrust ball bearings	Pillow Block	0.0	N/A	14.528
SKF BTM 85 ATN9/P4CDB thrust ball bearings	35 mm	One Shield One Contact Seal	72 mm	Single Row Non-Fill Slot
INA B7 thrust ball bearings	Flange Block	0.0	N/A	4.994