thrust ball bearings

Thrust ball bearings are classified into those with flat seats or aligning seats depending on the shape of the outer ring seat (housing washer). They can sustain axial loads but no radial loads. For Single-Direction Thrust Ball Bearings, pressed steel cages and machined brass cages are usually used The cages in Double- Direction Thrust Ball Bearings are the same as those in Single-Direction Thrust Ball Bearings of the same diameter series.
Features:Available in two designs: single direction and double direction.To accommodate initial misalignments in an assembly both designs are available with spherical aligning seats or aligning seat washers.High quality steel-ultra clean steel to extend bearing life by up to 80%.Advanced Grease Technology — NSK lubricants that can extend grease life and performance.
High Grade Balls — Quiet and smooth operation even at high speed.Optional seating rings take initial misalignment.

Bearing Number	Bore Dia	Outer DIa	Width	Size
ISB EB1.50.2645.400-1SPPN thrust ball bearings	Pillow Block	0.0	N/A	19.522
KOYO 51156 thrust ball bearings	Mounted Cartridge Units	0.0	N/A	11.804
NACHI 52217 thrust ball bearings	Bearings	0.0	N/A	165
70 mm x 105 mm x 10 mm NSK 54214U thrust ball bearings	Pillow Block	0.0	N/A	56.296
15 mm x 35 mm x 11 mm SKF NU 202 ECP thrust ball bearings	3/4 in	1500 lbf	2-15/16 in	Contact with Slinger
60 mm x 130 mm x 31 mm SKF NUP 312 ECJ thrust ball bearings	Flange Block	0.0	N/A	9.988
INA DL85 thrust ball bearings	Flange Block	0.0	N/A	10.442
40 mm x 72 mm x 15 mm NACHI 40TAB07DB thrust ball bearings	Pillow Block	0.0	N/A	8.626
SKF BTW 45 CTN9/SP thrust ball bearings	Flange Block	0.0	N/A	8.626
Toyana 54209U+U209 thrust ball bearings	Flange Block	0.0	N/A	15.89
30 mm x 62 mm x 16 mm SKF N 206 ECP thrust ball bearings	Pillow Block	0.0	N/A	19.522
55 mm x 120 mm x 29 mm SKF NJ 311 ECM thrust ball bearings	Pillow Block	0.0	N/A	14.528